收藏本站
BH1750FVI
Technical Note
● Cautions on use
1) Absolute Maximum Ratings
An excess in the absolute maximum ratings, such as supply voltage ( Vmax ), temperature range of operating conditions
( Topr ), etc., can break down devices, thus making impossible to identify breaking mode such as a short circuit or an open
circuit. If any special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take
physical safety measures including the use of fuses, etc.
2) GND voltage
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
Furthermore, check to be sure no terminals are at a potential lower than the GND voltage including an actual electric
transient.
3) Short circuit between terminals and erroneous mounting
In order to mount ICs on a set PCB, pay thorough attention to the direction and offset of the ICs. Erroneous mounting can
break down the ICs. Furthermore, if a short circuit occurs due to foreign matters entering between terminals or between
the terminal and the power supply or the GND terminal, the ICs can break down.
4) Operation in strong electromagnetic field
Be noted that using ICs in the strong electromagnetic field can malfunction them.
5) Inspection with set PCB
On the inspection with the set PCB, if a capacitor is connected to a low-impedance IC terminal, the IC can suffer stress.
Therefore, be sure to discharge from the set PCB by each process. Furthermore, in order to mount or dismount the set
PCB to/from the jig for the inspection process, be sure to turn OFF the power supply and then mount the set PCB to the jig.
After the completion of the inspection, be sure to turn OFF the power supply and then dismount it from the jig. In addition,
for protection against static electricity, establish a ground for the assembly process and pay thorough attention to the
transportation and the storage of the set PCB.
6) Input terminals
In terms of the construction of IC, parasitic elements are inevitably formed in relation to potential. The operation of the
parasitic element can cause interference with circuit operation, thus resulting in a malfunction and then breakdown of the
input terminal. Therefore, pay thorough attention not to handle the input terminals; such as to apply to the input terminals a
voltage lower than the GND respectively, so that any parasitic element will operate. Furthermore, do not apply a voltage to
the input terminals when no power supply voltage is applied to the IC. In addition, even if the power supply voltage is
applied, apply to the input terminals a voltage lower than the power supply voltage or within the guaranteed value of
electrical characteristics.
7) Thermal design
Perform thermal design in which there are adequate margins by taking into account the power dissipation ( Pd ) in actual
states of use.
8) Treatment of package
Dusts or scratch on the photo detector may affect the optical characteristics. Please handle it with care.
9) Rush current
When power is first supplied to the CMOS IC, it is possible that the internal logic may be unstable and rush current may
flow instantaneously. Therefore, give special consideration to power coupling capacitance, power wiring, width of GND
wiring, and routing of connections.
10) The exposed central pad on the back side of the package
There is an exposed central pad on the back side of the package. But please do it non connection. ( Don't solder, and
don't do electrical connection ) Please mount by Footprint dimensions described in the Jisso Information for WSOF6I. This
pad is GND level, therefore there is a possibility that LSI malfunctions and heavy-current is generated.
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
16/17
2011.11 - Rev.D
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
BH1751FVI-TR IC AMBIENT LIGHT SENSOR 6WSOF
BISDK02BI-03 KIT BISM II BLUETOOTH/802.11B/G
BMS4007 MOSFET N-CH 75V 60A TO-220ML
BS107AG MOSFET N-CH 200V 250MA TO-92
BS107PSTZ MOSFET N-CHAN 200V TO92-3
BS108G MOSFET N-CH 200V 250MA TO-92
BS120E0F PHOTODIODE BLUE SENS 1.55MM SQ
BS170_L34Z MOSFET N-CH 60V 500MA TO-92
相关代理商/技术参数
BH1751FVI 制造商:ROHM 制造商全称:Rohm 功能描述:Digital 16bit Serial Output Type Ambient Light Sensor IC
BH1751FVI-TR 功能描述:IC AMBIENT LIGHT SENSOR 6WSOF RoHS:是 类别:传感器，转换器 >> 光学 - 光电探测器 - 环境光传感器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 产品变化通告:Product Discontinuation 25/Jun/2012 标准包装:2,500 系列:- 带接近传感器:无 波长:- 电源电压:1.7 V ~ 2 V 电流 - 暗（标准）:- 电流 - 光（典型值）:- 输出类型:数字 - I²C 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UDFN 裸露焊盘 包装:带卷 (TR)
BH1771GLC-E2 功能描述:IC PROX SENSOR AMBIENT LT 10WLGA RoHS:是 类别:传感器，转换器 >> 多功能 系列:* 其它有关文件:Automotive Product Guide 标准包装:2,500 系列:- 传感器类型:光线和近程 输出类型:I²C?
BH1772GLC 制造商:ROHM 制造商全称:Rohm 功能描述:1 Chip Optical Proximity Sensor Ambient Light Sensor IC
BH1772GLC-E2 功能描述:IC SENSOR LIGHT AND PROXIMITY RoHS:是 类别:传感器，转换器 >> 多功能 系列:- 其它有关文件:Automotive Product Guide 标准包装:2,500 系列:- 传感器类型:光线和近程 输出类型:I²C?
BH1780GLI 制造商:ROHM Semiconductor 功能描述:
BH1780GLI-E2 功能描述:环境光传感器 AMBIENT LIGHT SENSOR 4-PIN RoHS:否 制造商:Vishay Semiconductors 工作电源电压: 峰值波长:570 nm 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:T-1 封装:Bulk
BH1790GLC-E2 功能描述:OPTICAL SENSOR FOR HEART RATE MO 制造商:rohm semiconductor 系列:- 零件状态:在售 传感器类型:血氧计/心率 输出类型:I2C 工作温度:-20°C ~ 85°C（TA） 标准包装:1